35w Powertronic Ballast - Osram - PTFIT35I
Safety advice
Ballast losses and lamp heat radiation can lead to heat accumulation in a completely closed case. Therefore it is necessary to ensure that the temperature at the measuring point t of the ECG does not exceed the maximum value.
Attention!
For safety reasons disconnect the device before replacing the lamp!
39 W
39 W
0.19 A
4.5 kVp
0.200…0.240 kHz
43.00 W
91 %
198…264 V
220…240 V
50…60 Hz
0.95
30 A
15
26
65
0.3 mA
250 V
250 V
250 V
120 pF
172.0 mm
83.0 mm
33.0 mm
163.0 mm
0.75…1.5 / 0.75…2.5 mm²
0.75…1.5 / 0.75…2.5 mm²
5.5…6.5 mm
5.5…6.5 mm
285.00 g
Plastic
-15…+60 °C
75 °C
30000 h
With cable clamp
39 W
1.5 m
Power reduction and switch off at T > 75 °C at the tc point
> 0.5 s
NYM-J 3x1.5 / NYM-J 3x2.5 / H05VV-F 3x1.5 / NHXMH-J 3x1.5 mm²
SIHF-J 3x1.5 / SIHF-J 3x2.5 / SIHSI 3x1.0 mm²
No
20 min
I
No
VDE / VDE-EMC / EAC / C-Tick
IP20
A2
Acc. to EN 61347-2-12/Acc. to EN 55015/Acc. to EN 61000-3-2/Acc. to EN 61547/Acc. to EN 62493
850410809000
14-04-2022
4008321377661
Lead
7439-92-1
The identification of the Candidate List substance is sufficient to allow safe use of the article.
debdcb03-c15a-4efc-b20c-4d88962b9a80
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4008321377661 | UNV
|
1 | 172mm x 83mm x 33mm | 285.00g | 0.47dm³ |
4008321377678 | VS
|
20 | 437mm x 100mm x 365mm | 6130.00g | 15.95dm³ |