-
Description
35w Powertronic Ballast - Osram - PTI35S - 4008321073112
- Long reliable life at maximum permitted temperatures
- Compact dimensions and low weight for small luminaire designs
- Excellent thermal behavior for very high limit temperatures tc and ta
- Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL)
- Shop lighting
- Health and fitness areas (in luminaires with protection class IP66 or higher)
- Effect and accent lighting
Safety advice
Ballast losses and lamp heat radiation can lead to heat accumulation in a completely closed case. Therefore it is necessary to ensure that the temperature at the measuring point t of the ECG does not exceed the maximum value.
Attention!
For safety reasons disconnect the device before replacing the lamp!
Any conductive material must have a minimum distance of 4 mm to the front of the terminal block.
Installation by qualified electrician only.
Terminals for protective earth not suitable for any through connection.
Technical Data
Electrical data
Lamp wattage
39 W
Maximum output power
39 W
Line current
0.19 A
Ignition voltage
4.5 kVp
Operating frequency
0.200…0.240 kHz
System wattage
43.00 W
Efficiency in full-load
91 %
Input voltage AC
198…264 V
Nominal voltage
220…240 V
Mains frequency
50…60 Hz
Power factor λ
0.95
Inrush current
30 A
Max. ECG no. on circuit breaker 10 A (B)
15
Max. ECG no. on circuit breaker 16 A (B)
26
Max. no. of ECGs on 16A MCB with EBN-OS
65
Protective conductor current
0.25 mA
U-OUT (working voltage)
250 V
Max. working voltage between LH and LL
250 V
Max. working voltage betw. LL/LH & earth
250 V
Max. capacitance of wire ECG/lamp
120 pF
Dimensions & weight
Length
110.0 mm
Width
75.0 mm
Height
30.0 mm
Mounting hole spacing, length
99.0 mm
Mounting hole spacing, width
64.0 mm
Cable cross-section, input side
0.5…2.5 mm²
Cable cross-section, output side
0.5…2.5 mm²
Wire preparation length, input side
10…11 mm
Wire preparation length, output side
10…11 mm
Product weight
250.00 g
Colors & materials
Casing material
Metal
Temperatures & operating conditions
Ambient temperature range
-25…+65 °C
Maximum temperature at tc test point
85 °C
Lifespan
ECG lifetime
50000 h
Additional product data
Design / version
Built-in unit
Suitable for lamp power (1 lamp)
39 W
Capabilities
Max. cable length to lamp/LED module
1.5 m
Overheating protection
Power reduction and switch off at T > 85 °C at the tc point
Overvoltage protection at 275…300 V
48 h
Overvoltage protection at 300…320 V
2 h
Overvoltage protection at 320…350 V
5 min
ECG reset time
> 0.5 s
Dimmable
No
Restriction on ignition time
20 min
Suitable for fixtures with prot. class
I
Intended for no-load operation
No
Certificates & standards
Approval marks – approval
ENEC 10 / VDE / VDE-EMC / EAC / C-Tick
Type of protection
IP20
EEI – Energy Label
A2
Standards
Acc. to EN 61347-2-12/Acc. to EN 55015/Acc. to EN 61000-3-2/Acc. to EN 61547
Logistical data
Commodity code
850410809000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
23-12-2021
Primary Article Identifier
4008321073112
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
1329b7c2-4227-485b-9bbd-6cd13951be92
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4008321073112 | UNV
|
1 | 110mm x 75mm x 30mm | 250.00g | 0.25dm³ |
| 4008321074522 | VS
|
20 | 412mm x 136mm x 186mm | 5169.89g | 10.42dm³ |
